ENDURO COMPUTER MOUNT

Regular Price
$17.00
Sale Price
$17.00
Regular Price
Out of Stock
Unit Price
per 

Shape/Computer type: Garmin Type B

Finish: Black

1014G

Details

Sticks Like $%*? To a Blanket!

Self-adhesive computer mount using 3M VHB tape (very high bond)

Designed to fit onto your top tube behind your stem for maximum protection and less distraction.

FIT OPTIONS

Type A for flat or slightly curved top tubes  Maximum curve of up to 3mm drop 12mm from the centre line. Most carbon and aluminium bikes require type A. The base of Type A's has a flat centre with curved 'wings' that flex to the top tube profile, including going all the way to flat.
Some customers have been surprised that the Type A has a pronounced curve to the base, be assured that it will flex to flat. Type A has a single dot on the spine.

Type B for round and heavily curved top tubes. Works on round tubes of 34mm, smaller diameters will require the mount being clamped in place overnight in order to ensure a good bond. Type B has 2 dots on the spine.

 

Supplied with alcohol wipe to clean the area to be attached to.

Manufactured in-house in nylon using Multi Jet Fusion additive manufacturing and shot peened for surface toughness and quality.

CERAKOTE COLOUR OPTIONS

Currently available for Garmin Type A only
Cerakote is a ultra thin ceramic coating which is hydrophobic, chemical and scratch resistant.

Top left to bottom right in image:

Blue Titanium (metallic flecks)
Tequila Sunrise (metallic flecks)
Burnt Bronze (metallic flecks)
Firehouse Red (satin)
Testing has shown that the coating on the enduro mounts are resistant to wear, however the tip of the little Garmin engagement tabs ( at 3 and 9 o'clock) will wear down to black.

 

IMPORTANT - Check there is clearance from the underside of bars/stem to the top tube:

 

 


Sticks Like $%*? To a Blanket!

Self-adhesive computer mount using 3M VHB tape (very high bond)

Designed to fit onto your top tube behind your stem for maximum protection and less distraction.

FIT OPTIONS

Type A for flat or slightly curved top tubes  Maximum curve of up to 3mm drop 12mm from the centre line. Most carbon and aluminium bikes require type A. The base of Type A's has a flat centre with curved 'wings' that flex to the top tube profile, including going all the way to flat.
Some customers have been surprised that the Type A has a pronounced curve to the base, be assured that it will flex to flat. Type A has a single dot on the spine.

Type B for round and heavily curved top tubes. Works on round tubes of 34mm, smaller diameters will require the mount being clamped in place overnight in order to ensure a good bond. Type B has 2 dots on the spine.

 

Supplied with alcohol wipe to clean the area to be attached to.

Manufactured in-house in nylon using Multi Jet Fusion additive manufacturing and shot peened for surface toughness and quality.

CERAKOTE COLOUR OPTIONS

Currently available for Garmin Type A only
Cerakote is a ultra thin ceramic coating which is hydrophobic, chemical and scratch resistant.

Top left to bottom right in image:

Blue Titanium (metallic flecks)
Tequila Sunrise (metallic flecks)
Burnt Bronze (metallic flecks)
Firehouse Red (satin)
Testing has shown that the coating on the enduro mounts are resistant to wear, however the tip of the little Garmin engagement tabs ( at 3 and 9 o'clock) will wear down to black.

 

IMPORTANT - Check there is clearance from the underside of bars/stem to the top tube:

 

 


Weight:

Material: MJF Nylon PA12 - manufactured in house

When fitting the adhesive needs a temperate of at least 20 degrees C to cure properly. After fitting the mount should be left overnight before riding.

See videos in image section of install and uninstall instructions. Also available here.

Recommended for smaller series computers no larger than Wahoo Element Roam, Garmin 500 series. Larger computer are vulnerable to knee knocks. As with any mount, in case of a crash, we recommend looping the computer's tether around the top tube.

To remove, pry the mount off from one end. The adhesive pad should remain in one piece but cannot be reused. Replacement VHB pads are available here. It helps to heat with a hairdryer or leave in a warm room beforehand. 

We hate it went a product has to be junked when a part can't be replaced. If spares aren't listed email us and we'll see if we can help.

Replacement VHB pads are available here

Customer Reviews

Based on 93 reviews
88%
(82)
8%
(7)
1%
(1)
1%
(1)
2%
(2)
C
CARLOS DUPOUY
They just created usps label

Totally disapointed. Im still waiting for my product. Sent and email ...no answer

H
Horacio Gallegos
Great mount

Great mount 100% recommend

J
John Galloway
Not for any downhill.

Shipped promptly and it will kind of hold the computer but that’s all I can say. I will not be using them. It might work on smooth trails but any bump, the computer starts to twist. 30 seconds of any downhill and the computer is dangling from the lanyard and slapping you in the leg. Definitely not for a enduro bike. Needs to be significantly tighter on the engagement.

A
Andrew Haynie
Enduro Mount is Amazing

Loved the first one I bought so much I bought more for my other bikes. Would highly recommend as it puts your expensive computer in the safest place I can think of mounted to the bike. Pictures I have are on my EPIC 8 EVO Pro and an Element Wahoo computer.

T
Thomas Teabo
Excellent

My Garmin mount works perfectly. I will always use this product from my Garmin Mounts